Avocent AMWorks, Installer/User Manual

Page: 27 / 113

Chapter 4: Resource Switching Router 19
• Multiple routers
• Multiple levels
• Both inputs and outputs
See Defining TRGs - Multiple Routers, Levels, I/O on page 23 for more information.
To define a TRG:
1. From the Resource Routers tab on the AMWorks software menu bar, click NVISION -
Configure . The Configure Resource Router dialog box displays.
2. Click the Define TRG tab.
3. From the Server Name drop-down list, select the server for which you wish to define a TRG.
The drop-down list contains the name of the available servers in the system. If a TRG has
already been defined for the selected server, the information is displayed in the input and
output tables.
4. From the Device drop-down list, select the switching router for the TRG.
NOTE: The switching router you select must be the same in the TRG, CRG and DRG for a specific index.
5. From the Level drop-down list, select the desired level available on the switching router for the
TRG. If you named levels earlier, the Level drop-down list will display the named levels;
otherwise, the name will be the ASCII character string representing the level number.
6. The Port Disposition button is selected by default. In this case, the Input button should be
the default.
NOTE: The port disposition can be changed from the default. If changed, ensure that the DRG is set to the same
port disposition as the TRG and the CRG is set to the opposite port disposition.
7. From the Port drop-down list, select a port (number or name) for the level you selected in
step 5. The port name, if applicable, or the ASCII string representing the port number
is displayed.
8. After selecting the router, level, port disposition and port, click the Add button to add the entry
to the end of the table. The table accumulates the entries made and displays them when you
click
Add .
NOTE: The Index automatically numbers the TRGs you define, starting at one and incrementing each row you
add. Ensure that the index (number) of the TRG entries matches the index (number) of the CRG and
DRG entries.
9. Repeat steps 5-8 to continue defining the TRG for the selected server.
10. (Optional) Modify a table entry by selecting the entry in the table. The entry parameters are
loaded into the fields to the left of the table. After making your selection from the drop-down
lists, click
Update to update the index parameters.
- and/or -
Delete a table entry by selecting the entry table and clicking the Delete button.