Aviat Networks ECLIPSE EDGE, User Manual

Page: 140 / 274

94 Aviat Networks
Chapter 4. Eclipse Edge Configuration and Diagnostics
The Report screen , as shown in
Figure 4-31
, provides a summary view of
operational status for a selected period.
4 Detail window. Presents higher resolution data and the ability
to select a report range. The most recent data is to the right
side of the window.The period displayed (number of bins) is
selected in the summary window (Item 2).
Data is separately displayed for Tx and Rx traffic and for
events. Throughputs, frame types, discards and errors are
graphed. Mouse-over to identify the data.
Each bin is presented as a vertical segment, with the width of
the segment dependent on the period selected.
Where data is incomplete the relevant bin segments are shown
with dark grey highlighting and ‘Incomplete’ will appear at the
top of the segment when moused-over.
i) Statistical data is displayed for a selected bin, simply
mouse-over to display. Any bin within the window can be
selected.
ii) Select a report range (optional), as shown by the blue
highlighted selection. Select the full period by double-clicking
in the window, or select a range by clicking in the Detail
window and dragging. Data for this selection is displayed in
the Report window. See Item 5.
iii) Red markers at the bottom of a bin indicate that an event
(alarm or informational) has occurred during the bin period.
To view events, select the Events report tab. See Item 5.
Events are mirrored from the Events Browser screen.
5 Select Graph (default) Report, or combined Graph and Report
screens.
Report window. Use these buttons to select graph, report, or
combined graph and report screen views. Graph is the default
screen.
Use the Ethernet Report. Rx and Tx statistics are displayed for
the report range selected in the Detail window.
Item Description
i
iii
ii