Avery Dennison SNAP 700, Operator'S And Service Manual

Page: 9 / 153

User’s Manual—SNAP™ 700 Printer
9
1.0 Introduction
AVERY DENNISON has designed the SNAP
TM
700 printer for simple installation,
easy operation, and dependability. Use your printer to produce two-sided,
brand/care labels paper hang tags and self-adhesive stickers for your apparel,
footwear, or other products needing identification. Printing up to a speed of up to
7 inches (178 mm) per second for care labels and 12 inches (305mm) per
second for tags and stickers, (supply dependent) the SNAP 700 printer features
quick change-outs of inks and tapes, multilingual voice prompts, and easy
operating system updates. Finally, the SNAP 700 printer supports various
options including RFID.
The SNAP 700 multiple head printer can have two different head configurations
when ordered. This manual covers both configurations.
This manual guides the printer operator as an easy-to-use, quick-reference
guide. It contains procedures for receiving, handling, set-up, installation,
operation, and maintenance of the SNAP 700 printer.
Please read this section of the manual to familiarize yourself with the printer and
to guide you through the initial receiving and set-up of your new SNAP 700
printer. Throughout this manual, a system of NOTES, CAUTIONS, and
WARNINGS identify key information to ensure your personal safety and to proper
printer operation. Please review these carefully.
We also strongly suggest that you watch the 17-minute training video,
which is available on the D2Comm web site. Refer to the documentation
included with the printer for more details.
NOTES call attention to information that is especially
significant to understanding and operating the equipment.
CAUTION notices inform you of actions or situations in
which the printer might be damaged.
WARNING notices describe situations in which lack of
attention or insufficient equipment knowledge could cause
either personal injury or damage to the printer.