![background image](http://html1.mh-extra.com/html/avery-dennison/cutter-2000/cutter-2000_technical-manual_3030526005.webp)
03/10 Rev. 5.04-01
TECHNICAL MANUAL
Connection, Setup, Service
Cutter 2000
5
Connecting the cutter
The cutter (fig. 1) is secured to the printer
by two screws and an adjustment plate. By
moving the adjustment plate, the cutting
line can be set parallel to the print image.
Tools
•
Allan key 3mm
•
Socket wrench, size 8
Assembly / Disassembling
1. Remove the tear-off edge (3) by
unscrewing the thumb screw (4).
2. Remove the cutter cover (1) by
unscrewing the two fastening screws (2,
fig. 2).
3. Screw on the cutter in place of the cutter
cover. To do this use the fastening screws
of the cutter cover (2) (2x Allan key screws
M 5x20). Initially just screw them in
slightly.
P
Continued overleaf.
WARNING!
Danger of injury if the cutter is
activated unintentionally!
«
Before beginning service work,
switch off the printer and pull out
the mains power supply plug.
1
3
2