03/10 Rev. 5.04-01
TECHNICAL MANUAL
Connection, Setup, Service
Cutter 2000
13
Circular cutter
Tools
•
Allan keys, 2.5 mm and 3 mm
•
Fork spanner SW 8
Disassembling/assembly
1. Remove the motor cover, motor, toothed
belt, photoelectric switch, oscillator disc
and toothed belt.
P
For more detailed information, see the
previous sections.
2. Loosen the two fastening screws (1, figs. 1
and 2) on the square axle. Fold back the
bottom cutter.
3. Extract the circular cutter (2, fig. 2).
P
Continued overleaf.
WARNING!
Danger of injury! There is a risk of
being cut while carrying out ser-
vice work on the cutter!
«
Avoid touching the cutter blades.
«
Handle the cutter very cautious.
1
2