![background image](http://html1.mh-extra.com/html/avery-dennison/cutter-2000/cutter-2000_technical-manual_3030526009.webp)
03/10 Rev. 5.04-01
TECHNICAL MANUAL
Connection, Setup, Service
Cutter 2000
9
Status reports
The following status reports may be displayed in conjunction with the cutter
function:
P
For more detailed information, see the chapter "Status Reports" in the
printers user manual.
P
Troubleshooting, see the chapter "Troubleshooting" in the printers service
manual.
Triggering a cut
If the cutter is properly mounted and activated, a cut can be triggered the
following ways:
•
Press the Cut button, while the printer is in offline mode.
•
Include a cut command in the print job, e.g. by setting the respective
parameter in the Easy Plug #ER command.
TTX 350 TTK
64-xx / AP 5.4 / AP 5.6 / AP 7.t Example, comment
ST14
ST14
5005 Cutter
Cutter malfunction
ST68
No peripheral device
preparation
[Tab. 2]
Status messages caused by printer operation with cutter.