![background image](http://html1.mh-extra.com/html/avery-dennison/cutter-2000/cutter-2000_technical-manual_3030526015.webp)
03/10 Rev. 5.04-01
TECHNICAL MANUAL
Connection, Setup, Service
Cutter 2000
15
Bottom cutter
The bottom cutter (1) is attached to the
square axle (2) by a spring plate (3). The
bottom cutter, spring plate and square axle
are only available as pre-configured spare
parts.
Tool
Allan keys, 2.5 mm and 3 mm
Disassembling/assembly
«
Unscrew the screws (2x Allan key) at the
ends of the square axle. Remove the
square axle together with the spring plate
and the cutter.
¯
Set the contact pressure: see Steps 4
and 5 in the previous section "Circular
cutter".
¯
The bottom cutter must be readjusted
during assembly if you unscrew the
fastening screws. Dimensions, see
drawing cutout (fig. 2).
1
2