![background image](http://html1.mh-extra.com/html/avery-dennison/cutter-2000/cutter-2000_technical-manual_3030526003.webp)
03/10 Rev. 5.04-01
TECHNICAL MANUAL
Connection, Setup, Service
Cutter 2000
3
General Notes
Proper Usage
The cutter option (subsequently referred to as the "cutter") is a peripheral de-
vice for label printers of the type TTK, TTX 350, 64-xx, AP 5.4, AP 5.6 or
AP 7.t. The cutter is designed for cutting label material after it has been prin-
ted.
Technical Specifications
Properties
The cutter blade cuts self-adhesive, cardboard and synthetic materials up to
240 g/m
2
and up to a material thickness of 0.9 mm – considering the following
exceptions:
Cut width
Cutters of varying widths are intended for use with printers of the 64-xx series
to allow labels to be cut up to the maximum material width of the printer being
used.
Double cut
With the double cut function, the operator can remove gaps from the label
material where required. Here the cut gap can be set from 1 to 5 mm.
CAUTION! - Keep to the following rules in order not to damage or to soil the
cutter blade.
«
The 8" wide cutter must not be used for materials exceeding 160 g/m
2
.
«
Fiber strengthened materials (e.g. Tyvek) must not be cut.
«
If using self-adhesive material, cut
between
the labels (backing paper).
Otherwise, the adhesive will stick to the cutter blades and will have a
negative effect on the cutting function.