manualshive.com logo in svg

Avery Berkel IM Series, User Instructions

The Sterling IM Series offers top-notch performance and reliability for your installation needs. Ensure a seamless setup with the comprehensive Installation Instructions & Owner's Manual. Download this free manual effortlessly from our website, empowering you to make the most of your Sterling IM Series product.

Share
Download
background image

Programming the machine

IM series User Instructions

34

4.2   Creating and editing text

Deleting a character

1. Press 

 or 

 until the character is at the right hand end of the display.

2. Press 

 to delete the last character.

Clearing the entire text entered

•

Press 

Shift

 then 

. Do not press any other key.

Enter new text if required.

PLU display text

The PLU display text allows you to enter up to 60 characters over two lines (30 characters 
per line). The second line could be used to display the product text in an alternative 
language.

Note: The promotional message (if any) will replace the second line of the product text.

Extended character set

You can create additional text characters using the extended character facility and 
entering the appropriate numeric code for the character. See 

section 17.1

, 

page 237

, for 

the table of characters available and the corresponding numeric codes.

•

Press 

ALT

 followed by the numeric code keys for the character required.

Summary of Contents for IM Series

































































































































































































































































Reviews:

No comments

Related manuals for IM Series

Jata hogar 713 Instructions Of Use preview
713
Brand: Jata hogar Pages: 20
Salter Brecknell S-100 Operation Manual preview
S-100
Brand: Salter Brecknell Pages: 17
U.S. Solid 1004 Instruction Manual preview
1004
Brand: U.S. Solid Pages: 14
T Scale IP30 Operation Manual preview
IP30
Brand: T Scale Pages: 52
Soehnle Style Sense Multi 100 User Manual preview
Style Sense Multi 100
Brand: Soehnle Pages: 38
Gorenje OT 200 GEB Instruction Manuals preview
OT 200 GEB
Brand: Gorenje Pages: 20
Target FeedMaster-RF User Manual preview
FeedMaster-RF
Brand: Target Pages: 72
Vivax KS-505P User Manual preview
KS-505P
Brand: Vivax Pages: 48
WAHL James Martin ZX774 Manual preview
ZX774
Brand: WAHL James Martin Pages: 5
Vitek VT-8081 Instruction Manual preview
VT-8081
Brand: Vitek Pages: 2
Yunmai Smart Scale User Manual preview
Smart Scale
Brand: Yunmai Pages: 6
Supco PCS220 User Manual preview
PCS220
Brand: Supco Pages: 9
Microlife WS 50 Instructions Manual preview
WS 50
Brand: Microlife Pages: 10
COLPHARMA MediKilo FITNESS 10890 User Manual preview
MediKilo FITNESS 10890
Brand: COLPHARMA Pages: 2
Atlanta ATH-6163 Instruction Manual preview
ATH-6163
Brand: Atlanta Pages: 24
Lyman Pro-Touch 1500 Operating Instructions preview
Pro-Touch 1500
Brand: Lyman Pages: 2
Taurus Munich Manual preview
Munich
Brand: Taurus Pages: 48
Advanced Poly-Packaging US-4000 Operation Manual preview
US-4000
Brand: Advanced Poly-Packaging Pages: 54

Brands by name

Popular brands

Load more brands