Avery Berkel IM Series User Instructions Download Page 30

Page: 30 / 256

4.1 Manager mode

IM series User Instructions

Programming the machine

Navigating the programming displays

The following diagram shows the keys you should use to

•

move around the programming screen

•

select menu items.

•

select options

Your programming keyboard overlay may have keys that allow you to go directly to some
of the menu items.

Select menu
displayed

Move to top level of menus.

When at top level of menus,
return to operator mode.

Move to menu item
above.

Save data entered up to this
point.

PLU Create/Edit quick save

To exit Manager Mode from within a menu

x 2

Move back up one
menu level

Move to menu item
below.

Select menu item
displayed

Select the like numbered
menu item

Figure 4.2

Navigating the menus

Summary of Contents for IM Series

































































































































































































































































Search results

Summary of Contents for IM Series

Reviews:

Related manuals for IM Series

Brands by name

Popular brands

Avery Berkel IM Series, User Instructions

Search results

Summary of Contents for IM Series

Reviews:

Related manuals for IM Series

Brands by name

Popular brands