Avery Berkel IM Series User Instructions Download Page 45

Page: 45 / 256

Programming the machine

IM series User Instructions

4.7 Setting up the ADD label

4.7

Setting up the ADD label

The ADD function enables you to obtain a label with totals printed on it.

Your machine can be configured to print one of four types of ADD labels:

•

weighed and non weighed transactions with a label after each transaction and a single
ADD label at the end of all the transactions.

•

weighed and non weighed transactions with a single ADD label at the end of all the
transactions.

•

weighed and non weighed transactions with a single `receipt' type ADD label at the
end of all the transactions.

•

weighed and non weighed transactions with a label after each transactions and a
single `receipt' type ADD label at the end of all the transactions.

For information on sell by dates see

Date code

page 51

For information on sales texts see

Sales message

page 50

Please remember .....

•

is not operable when the machine is set to Receipt Mode.

•

The barcode format for the ADD label is the receipt barcode format programmed for
the machine unless the labels are for a single PLU. In this case the PLU barcode
format will be used.

1 Products

6 Label Details

1 Add Label

Label Format

Add Label Text (200 chars. max.)

Barcode Disabled/Enabled

Date 1 Disabled
Date 1 Days
Date 1 Months

System Data

Figure 4.12 Creating an ADD label

Summary of Contents for IM Series

































































































































































































































































Search results

Summary of Contents for IM Series

Reviews:

Related manuals for IM Series

Brands by name

Popular brands

Avery Berkel IM Series, User Instructions

Search results

Summary of Contents for IM Series

Reviews:

Related manuals for IM Series

Brands by name

Popular brands