Avery Berkel IM Series User Instructions Download

Page: 106 / 256

7.4 Barcode scanning

107

IM series User Instructions

Serving Customers

7.4

Barcode scanning

Barcode scanning is normally used with receipt printing operations.

Use the barcode scanner at the machine to read barcodes:

•

on products

•

on labels.

•

on counter receipts

When the scanner successfully reads the barcode it bleeps.

Scanning barcodes means that

•

you do not have to enter product numbers to recall PLUs.

•

at a Point of Sale (PoS) machine or checkout, you can scan customer numbers from
subtotal counter receipts to add them to the sales total receipt.

Scanning a product.

0.35

Baked beans

0.35

Oper

. 1

Repeat steps 1 and 2 until you have scanned all the goods.

Cntrl

If the barcode does not scan

PLU

Oper

. 1

Changing the number of items

More than 1 of the same item?

Items

number of items

1 - 99

1.05

3 Baked beans

0.35

Oper

. 1

Summary of Contents for IM Series

































































































































































































































































Search results

Summary of Contents for IM Series

Reviews:

Related manuals for IM Series

Brands by name

Popular brands

Avery Berkel IM Series, User Instructions

Search results

Summary of Contents for IM Series

Reviews:

Related manuals for IM Series

Brands by name

Popular brands