Avaya PARTNER 1600 DSL MODULE User Manual Download

Page: 80 / 213

Avaya, Inc.

- 79 - PARTNER ACS 1600 DSL module User Guide

M. Manage
MGCP/NCS
Embedded
Client

Displays the

MGCP/NCS Management Menu

, which contains

the following submenus and commands.

C. Configure MGCP/NCS parameters

Sets the MGCP/NCS parameters. Type the following
information, and then press ENTER:

••••

Default IP address for Notified Entity

••••

IP address to use for MGCP signaling (Data)
packets

••••

Type of Service (TOS) field value for the IP header
of the outbound signaling packets

••••

IP address to use for RTP Transport (Voice)
packets

••••

TOS field value for the IP header of the outbound
RTP Transport packets

S. Display MGCP/NCS statistics

Displays the Endpoint (line) and connection statistics. If no
calls are active, only whether or not the Endpoint is currently
connected to its Notified Entity displays.

D. Debug MGCP/NCS

Displays the

MGCP Debug menu

, which contains the

following commands.

1. Disable all msgs

2. Enable Informational msgs

3. Enable Verbose msgs

Select your choice.

R. Remove a connection

Removes LOST connections. Type the number of the
Connection ID to delete, and then press ENTER.

Summary of Contents for PARTNER 1600 DSL MODULE






















































































































































































































Search results

Summary of Contents for PARTNER 1600 DSL MODULE

Reviews:

Related manuals for PARTNER 1600 DSL MODULE

Brands by name

Popular brands

Avaya PARTNER 1600 DSL MODULE, User Manual

Search results

Summary of Contents for PARTNER 1600 DSL MODULE

Reviews:

Related manuals for PARTNER 1600 DSL MODULE

Brands by name

Popular brands