Avaya, Inc.
- 137 - PARTNER ACS 1600 DSL module User Guide
T. Remove the Default Route
D. Display Route Table
3.
Select
Add/Change the Default Route
.
4.
Type the gateway address for the default route, press
ENTER, and then type
Y
.
The
Router Modification Menu
displays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Disabling
bridging
To configure the PARTNER ACS 1600 DSL module as a
router, you must disable bridging both globally and by port.
The order in which you perform the procedures is irrelevant.
When you disable bridging globally, it automatically disables
bridging for all ports and disables the spanning tree protocol.
Disabling bridging globally
To disable bridging globally:
1.
On the Main Menu, select
Configure Bridge
.
The
Bridge Configuration Menu
displays.
*****************************************
*
Bridge Configuration Menu
*
*****************************************
G. Enable/Disable Bridging Globally
P. Enable/Disable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O. Enable/Disable Spanning Tree by Port
R. Configure Spanning Tree Bridge
Priority
Q. Configure Spanning Tree Port Priority
H. Configure Spanning Tree Hello Time
S. Configure Spanning Tree Max Age
F. Configure Spanning Tree Forward Delay
