Avaya PARTNER 1600 DSL MODULE User Manual Download

Page: 159 / 213

Avaya, Inc.

- 158 - PARTNER ACS 1600 DSL module User Guide

Select

Configure NAT Port Range

The following instructions display on-screen:

Enter Low End of NAT Port Range

(5000..65534): (50000)

Type the low end value (range = 5000-65534), and then
press ENTER.

The following instructions display on-screen:

Enter High End of NAT Port Range

(5010..65534): (50000)

Type the high end value (range = 5000-65534), and then
press ENTER.

The

NAT Configuration Menu

redisplays.

You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.

Summary of Contents for PARTNER 1600 DSL MODULE






















































































































































































































Search results

Summary of Contents for PARTNER 1600 DSL MODULE

Reviews:

Related manuals for PARTNER 1600 DSL MODULE

Brands by name

Popular brands

Avaya PARTNER 1600 DSL MODULE, User Manual

Search results

Summary of Contents for PARTNER 1600 DSL MODULE

Reviews:

Related manuals for PARTNER 1600 DSL MODULE

Brands by name

Popular brands