Avaya PARTNER 1600 DSL MODULE User Manual Download

Page: 82 / 213

Avaya, Inc.

- 81 - PARTNER ACS 1600 DSL module User Guide

••••

Payload

••••

CPE Signal

••••

GWY Signal

D. Display Debug State/Flags

Displays the following information about the active
debug state and flags:

••••

Debugging

– ENABLED or DISABLED.

••••

Flags:

Globals

(DT/PCHES)

T10 & T11 Timeouts

WAN

Signaling

WAN Input Ready

POTS Input Ready

POTS Hook State

C. Control Debug (Enable/Disable)

Enables and disables debugging.

S. Set Debug Flags

Sets values for the following debug flags:

••••

Globals (DT/PCHES)

••••

T10 & T11 Timeouts

••••

WAN Signaling

••••

WAN Input Ready

••••

POTS Input Ready

••••

POTS Hook State

The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.

Your settings display in the

D. Display Debug

State/Flags

command.

Select your choice.

Summary of Contents for PARTNER 1600 DSL MODULE






















































































































































































































Search results

Summary of Contents for PARTNER 1600 DSL MODULE

Reviews:

Related manuals for PARTNER 1600 DSL MODULE

Brands by name

Popular brands

Avaya PARTNER 1600 DSL MODULE, User Manual

Search results

Summary of Contents for PARTNER 1600 DSL MODULE

Reviews:

Related manuals for PARTNER 1600 DSL MODULE

Brands by name

Popular brands