Avaya, Inc.
- 130 - PARTNER ACS 1600 DSL module User Guide
5.
Type the new IP address, or press ENTER to select the
current IP address.
The following instructions display on-screen:
Current subnet mask = 0.0.0.0
Enter new subnet mask for this interface:
6.
Type the new subnet mask address, or press ENTER to
select the current subnet mask.
The following instructions display on-screen:
Select priority Normal/High [N/H] (N):
7.
Do one of the following, and then type
Y
:
To give the interface high priority, type
H
.
To give the interface normal priority, type
N
.
The
Router Configuration Menu
redisplays.
8.
Repeat steps 1-6 for each port for which you want to
configure an IP address.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Enabling RIP
poisoned
reverse
When you enable RIP, the PARTNER ACS 1600 DSL module
sends routing data to other adjacent routers and dynamically
“learns” the associated network topology.
For RIP to work, you must enable RIP globally or locally (by
port), and then setting the RIP version. The order in which
you perform the procedures is irrelevant.
