Avaya, Inc.
- 145 - PARTNER ACS 1600 DSL module User Guide
4.
Repeat steps 1-3 for each port on which you want to
disable bridging.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Setting the bridge aging timer
The
bridge aging timer
sets the amount of time that the
PARTNER ACS 1600 DSL module keeps a MAC address in
the bridging table. When the timer reaches zero, the
database deletes the address and creates a new bridge.
To set the bridge aging timer:
1.
On the Main Menu, select
Configure Bridge
.
The
Bridge Configuration Menu
displays.
*****************************************
*
Bridge Configuration Menu
*
*****************************************
G. Enable/Disable Bridging Globally
P. Enable/Disable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O. Enable/Disable Spanning Tree by Port
R. Configure Spanning Tree Bridge
Priority
Q. Configure Spanning Tree Port Priority
H. Configure Spanning Tree Hello Time
S. Configure Spanning Tree Max Age
F. Configure Spanning Tree Forward Delay
C. Configure Spanning Tree Path Cost
D. Delete Bridge Forwarding Database
Entry
2.
Select
Configure Bridge Aging Timer
.
The following instructions display on-screen:
Enter Bridge Aging time in seconds
(1..3600): (300)
3.
Type the bridge aging time (range = 1-3600 seconds), or
press ENTER to accept the default of 300 seconds.
