manualshive.com logo in svg

Avaya PARTNER 1600 DSL MODULE, User Manual

Share
Download
Avaya PARTNER 1600 DSL MODULE User Manual Download Page 69

Avaya, Inc.

- 68 - PARTNER ACS 1600 DSL module User Guide

F. Display DHCP Configuration

Displays the following information about the DHCP
configuration:

•

 

Default gateway

 - IP address of packets sent to

DHCP Clients.

•

 

Default DNS server

 - IP address of the DNS

server.

•

 

Default NetBIOS server

 - IP address of the

NetBIOS server.

•

 

Node type

 - NetBIOS nodes type: B-node, P-node,

M-node or H-node.

•

 

Default subnet

 - IP subnet mask; number of bits

reserved for the host ID.

•

 

Default lease

 - length of time to keep the Internet

connection active.

•

 

Domain name

 - defines the entity that owns the IP

address.  For example, avaya.com.

•

 

Low address

 - minimum IP address to assign.

•

 

High address

 - maximum IP address to assign.

•

 

Client Number 

- client entry number.

•

 

Host name

 - name of the host.

•

 

IP address

 - IP address of outgoing interface.

•

 

Subnet mask

 - IP subnet mask; number of bits

reserved for the host ID.

•

 

Lease time

 - length of time to keep the Internet

connection active.

•

 

Gateway

 - IP address of packets sent to

destination.

•

 

DNS Server

 - IP address of the DNS server.

S. Display DHCP Server Statistics

Displays the following information about the DHCP Server.

•

 

plain bootp requests received

•

 

plain bootp replys sent

•

 

discover packets sent

•

 

offer packets sent

•

 

dhcp request packets received

•

 

declines received

•

 

releases received

•

 

acks sent

Summary of Contents for PARTNER 1600 DSL MODULE






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands