Avaya, Inc.
- 49 - PARTNER ACS 1600 DSL module User Guide
2. Configure Receive CIR
Follow the on-screen messages to enter the
following information. Questions below may or
not display, depending on the options that you
select.
•
Receive Committed Information Rate
(CIR)
•
Committed burst size (Bc)
•
Circuit
Throughput
•
Excess burst size (Be)
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
3. Configure FRF.12 Fragmentation
Displays the
End-to-End Fragmentation
Configuration
submenu, which contains the
following commands.
1. Enable/Disable End-to-End FRF.12
Enables and disables End-to-End
FRF.12.
2. Set Fragmentation Size
Sets the maximum fragmentation size, a
value between 100-1,600 bytes.
Type the fragmentation size, and then
press ENTER.
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
Select your choice.
