Avaya, Inc.
- 133 - PARTNER ACS 1600 DSL module User Guide
4.
Type
E
.
The
Router Configuration Menu
redisplays.
5.
Repeat steps 1-3 for each port for which you want to
enable RIP poisoned reverse.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Setting the RIP version
To set the RIP version:
1.
On the Main Menu, select
Configure IP Router
.
The
Router Configuration Menu
displays.
*****************************************
*
Router Configuration Menu
*
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
D. Display Route Table
2.
Select
Configure RIP Version by Port
.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
