manualshive.com logo in svg

Avaya PARTNER 1600 DSL MODULE, User Manual

The Avaya PARTNER 1600 DSL MODULE is a high-performance communication device designed to enhance connectivity. To ensure seamless usage, we offer a comprehensive User Manual that you can download for free from our website. Obtain step-by-step instructions and maximize the potential of your product.

Share
Download
background image

Avaya, Inc.

- 32 - PARTNER ACS 1600 DSL module User Guide

T. Remove the Default Route

Deletes the default static route from the Route Table.
Type the IP address to remove, and then press
ENTER.

D. Display Route Table

Displays the following information about statically
configured routes and dynamically learned ones:

•

 

NETWORK ADDRESS 

- destination

address.

•

 

NETMASK

 - IP subnet mask; number of bits

reserved for the host ID.

•

 

GATEWAY ADDRESS

 - IP address of

packets sent to destination.

•

 

interface

 - IP address of outgoing interface.

•

 

Metric

 - number of hops (routers) required to

reach the specified gateway.

•

 

Type

 – static or dynamic.

R. Enable/Disable RIP

Enables and disables the Routing Information Protocol (RIP).
RIP sends routing information from one router to adjacent
routers, dynamically "learning" network topology.

When you enable RIP, the PARTNER ACS 1600 DSL module
stores sent routing information in the Route Table.  For more
information on the Route Table, see "Reports Menu" earlier in
this chapter.

V. Configure RIP Version by Port

Sets the RIP version for the selected port.

Type the number of the Interface, the port number, and then
select one of the following RIP Versions:

0. Disabled
1. Version 1 Broadcast
2. Version 2 Broadcast
3. Version 2 Multicast

P. Configure RIP Poisoned Reverse by Port

Enables and disables RIP Poisoned Reverse for the selected
interface.

Type the number of the Interface, and then enable or disable.

Summary of Contents for PARTNER 1600 DSL MODULE






















































































































































































































Reviews:

No comments

Related manuals for PARTNER 1600 DSL MODULE

AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Gates Underwater Products F55 Setup, Use And Care Manual preview
F55
Brand: Gates Underwater Products Pages: 49
Gates Underwater Products Alexa Setup, Use And Care Manual preview
Alexa
Brand: Gates Underwater Products Pages: 45
LAZER CORSICA User Manual preview
CORSICA
Brand: LAZER Pages: 19
M-Audio Audio Interface Conectiv User Manual preview
Audio Interface Conectiv
Brand: M-Audio Pages: 18
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
National Cycle Spartan N21202 Installation Instructions preview
Spartan N21202
Brand: National Cycle Pages: 3
FireplaceXtrordinair 564 25K Manual preview
564 25K
Brand: FireplaceXtrordinair Pages: 38
LYSON PhotoChrome R-38 Installation Instructions Manual preview
PhotoChrome R-38
Brand: LYSON Pages: 8
Movi 1000010212 User Manual preview
1000010212
Brand: Movi Pages: 67
OHAUS DEFENDER SERIES Assembly Instructions Manual preview
DEFENDER SERIES
Brand: OHAUS Pages: 55
Datasensor S62 B Series Instruction Manual preview
S62 B Series
Brand: Datasensor Pages: 4
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Winsen RD-623 User Manual preview
RD-623
Brand: Winsen Pages: 6
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
Unifone Small Office Installation And Programming Manual preview
Small Office
Brand: Unifone Pages: 96

Brands by name

Popular brands

Load more brands