manualshive.com logo in svg

Avaya Media Processing Server 500, Hardware Installation And Maintenance, Page: 99 / 220

Share
Download
Avaya Media Processing Server 500 Hardware Installation And Maintenance Download Page 99

Chapter 4: Configuration (Part II)

This chapter covers:

1. Configuring Redundant Ethernet
2. Setting up NetMeeting
3. Verifying Boot ROM Settings
4. System Self Tests

Configuring the binding order

About this task

Configure the binding order of the network cards. The Private network interface card must be bound

first and then the Customer/Public network interface card. If a team is present then the team of the

Private Network should be bound first.

Procedure

1. Choose 

Start

 > 

Control Panel

 > 

Network and Internet

 > 

Network and Sharing Center

.

2. Click 

Change adapter settings

.

3. In the Network Connections window, press the 

ALT

 key.

The system displays a hidden menu.

4. Choose 

Advanced 

 > 

Advanced Settings

.

5. In the 

Connections

 box, ensure that the contact center subnet connection is listed first.

If it is not listed first, adjust the order.

Configuring Redundant Ethernet

Redundant Ethernet provides a second Ethernet switch with fail-over capability so that the loss of a
single Ethernet Switch does not compromise system operation.

October 2014

Avaya Media Processing Server 500 Hardware Installation and Maintenance     

99

Comments? [email protected]

Summary of Contents for Media Processing Server 500





























































































































































































































Reviews:

No comments