manualshive.com logo in svg

Avaya Media Processing Server 500, Hardware Installation And Maintenance, Page: 51 / 220

Share
Download
Avaya Media Processing Server 500 Hardware Installation And Maintenance Download Page 51

Figure 26: Back of Desktop Seagate DAT Drive

Figure 27: Back of Rack Mount Seagate DAT Drive

Note:

Do not modify any other jumper settings.

2. Reassemble the drive and affix a label to the drive case or enclosure indicating the new DIP

switch and jumper settings. For example:

SUN UNIX 5-ON 6-OFF 7-ON 8-ON, SCSI ID=4

Installing a Customer Supplied USB Modem

USB modems are not supported on Sun platforms.

Windows-based servers do not provide sufficient power to source most non-powered external USB
modems but any commercially available powered USB modem can be used. Avaya has not tested,
nor does it endorse, any particular model of powered USB modem. If a powered USB modem is not
available, Avaya has successfully tested the use of a powered USB hub (for example, Belkin Model

Installing a Customer Supplied USB Modem

October 2014

Avaya Media Processing Server 500 Hardware Installation and Maintenance     

51

Comments? [email protected]

Summary of Contents for Media Processing Server 500





























































































































































































































Reviews:

No comments