10.7.0.0 255.255.0.0
10.8.0.0 255.255.0.0
Executing the Netinstall Configuration Script
The netinstall script automates most of the configuration for both the /etc/hosts and /etc/bootptab
files.
Note:
You must log on as root to execute this script.
Prior to running the netinstall script you must know:
• The Ethernet (MAC) address of each TMS installed in the system. This
information is located on a label affixed to the front sheet metal of each card.
• How to configure the bootptab and hosts files using netinstall.
Note:
The following sample netinstall outputs are examples only (although Chassis #1 is shown, the
default is Chassis #15).
root@MPS1 {36} netinstall
=============================================
NETINSTALL V1.1
Wed Apr 3
(c) 2000 Avaya Incorporated
IP of Primary SCN on A Network: [10.7.0.1]10.7.0.1
IP of Secondary SCN on B Network: [10.8.0.2]10.8.0.2 //Secondary AP
Chassis : [1]1
Backplane Slot : [1]1
Ethernet Address : [00:80:01:80:01:9c]01:9c
Save changes (y/n)? : [n] y
Install another card (y/n)? : [n] y
Chassis : [1]1
Backplane Slot : [2]2
Ethernet Address : [00:80:01:80:00:6c]00:6c
Save changes (y/n)? : [n] y
Install another card (y/n)? : [n] y
Chassis : [1]1
Backplane Slot : [3]3
Ethernet Address : [00:80:01:80:01:71]01:7c
Save changes (y/n)? : [n] y
Install another card (y/n)? : [n] y
Chassis : [1]1
Backplane Slot : [4]4
Ethernet Address : [00:80:01:80:00:8a]00:8a
Save changes (y/n)? : [n] y
Install another card (y/n)? : [n] y
Chassis : [1]1
Backplane Slot : [7]7
Executing the Netinstall Configuration Script
October 2014
Avaya Media Processing Server 500 Hardware Installation and Maintenance
61