Avaya IP Office 2050 User Manual Download Page 125

Page: 125 / 142

Troubleshooting the Avaya 2050 IP Softphone

125

In some cases, the Windows operating system defaults all the sounds to
the new sound device.

To set Windows sounds to play from your computer speakers:

Select

Start > Control Panel > Sounds, Speech, and Audio

Devices

Select

Sounds and Audio Device

Select

Audio

From the

Sound Playback > Default device

list, select your

computer sound card.

Note:

If you do not want to use the Headset Adapter for playback,

select another device from the

Sound playback > Default device

list.

Advanced audio problems due to network performance

If network performance causes audio problems, use the Advanced Audio
dialog box in the Avaya 2050 IP Softphone Settings window to override
your communication server audio values.

For more information about Advanced Audio, see

“Advanced Audio” on

page 92

Reset conditions

The Avaya 2050 IP Softphone resets when:

•

The communication server causes the Avaya 2050 IP Softphone to
perform a hard reset.

•

You change the Avaya 2050 IP Softphone theme.

•

Firewall applications intercept or delay packets, causing the
Avaya 2050 IP Softphone to reset due to the expiration of the
Watchdog timer.

Note:

Use care when using firewall applications on the same

computer as the Avaya 2050 IP Softphone.

•

Excess delay or loss of communication with the server occurs.

Summary of Contents for IP Office 2050















































































































































Search results

Summary of Contents for IP Office 2050

Reviews:

Related manuals for IP Office 2050

Brands by name

Popular brands

Avaya IP Office 2050, User Manual

Search results

Summary of Contents for IP Office 2050

Reviews:

Related manuals for IP Office 2050

Brands by name

Popular brands