Avaya IP Office 2050 User Manual Download Page 100

Page: 100 / 142

Avaya 2050 IP Softphone Settings

100

You can set the lamp to illuminate under the following conditions:

•

Manual Override

•

Headset Disconnect

•

Active Call

•

Message Waiting

Select the cadence (how the lamp illuminates) that you want to use for
each of the above conditions. Available cadences include:

•

None

•

Flash

•

Flicker

•

Blink

Manual Override

With Manual Override enabled, you can turn on the external lamp by
pressing the Smart Functions button on your USB Headset Adapter.

To enable Manual Override, select the cadence you want from the list. To
disable Manual Override, select

None

Headset Disconnect

With Headset Disconnect enabled, the external lamp activates when the
headset registers as disconnected from the USB Headset Adapter.

To enable Headset Disconnect, select the cadence you want from the list.
To disable Headset Disconnect, select

None

Active Call

With Active Call enabled, the external lamp activates when the
Avaya 2050 IP Softphone registers an active call.

To enable Active Call, select the cadence you want from the list. To
disable Active Call, select

None

Summary of Contents for IP Office 2050















































































































































Search results

Summary of Contents for IP Office 2050

Reviews:

Related manuals for IP Office 2050

Brands by name

Popular brands

Avaya IP Office 2050, User Manual

Search results

Summary of Contents for IP Office 2050

Reviews:

Related manuals for IP Office 2050

Brands by name

Popular brands