Testing the complete configuration
268
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Testing Expansion Interface circuit packs, if
used
Check each Expansion Interface (EI) circuit pack in the media gateway.
1
Type
test board UUCSS
where UUCSS is the cabinet, and slot for an EI circuit pack in the media
gateway, and press Enter.
NOTE:
Labels on the port network and on the strip under the circuit pack contain this information.
2
Verify the screen displays test results similar to
Figure 106, Sample test results for Expansion
Interface Board 2A01,
on page 268. This example is for board 2a01.
3
If any result is FAIL, check the connections for the fiber optic link.
4
Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
Figure 106: Sample test results for Expansion Interface Board 2A01
Testing time division multiplexing bus for
each port network
Check each TDM bus for each port network (PN) in the configuration.
1
Type
test tdm port-network 1
and press Enter.
2
Verify a test results screen similar to
Figure 107, Sample test results for TDM bus port network 1,
on page 269
appears.
3
If result is FAIL for any test, check the connectors of the TDM bus cables in PN 2.
4
Repeat these steps for each PN to check the TDM bus cables.
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A01 EXP-INTF 237 PASS
02A01 EXP-INTF 238 PASS
02A01 EXP-INTF 240 PASS
02A01 EXP-INTF 241 PASS
02A01 EXP-INTF 244 PASS
02A01 EXP-INTF 316 PASS
