Installing and wiring telephones and trunks
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
193
December 2003
Installing and wiring telephones and trunks
The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples only;
actual wiring procedures may vary at each site.
After installing the equipment, the data for the telephone features must be administered. These
procedures are provided in the Administrator’s Guide for the Avaya Communication Manager or with the
specific telephone or console.
NOTE:
See the Installation for Adjuncts and Peripherals for Avaya Communication Manager to
install the necessary peripheral equipment.
Wiring telephones and trunks
This section includes the following wiring examples and wiring procedures:
•
Connecting telephones
on page 194
•
Analog tie trunk example
on page 198
•
Digital tie trunk example
on page 199
•
DS1 tie trunk example
on page 200
•
Auxiliary connector outputs (MCC1 and Media Gateways only)
on page 203
•
Three-pair and four-pair modularity
on page 206
•
Adjunct power connection locations
on page 207
•
Attendant console example
on page 208
•
Connecting external alarm indicators and auxiliary power
on page 209
•
Connect Power Distribution Unit External Alarm Wires
on page 211
•
Installing off-premises station wiring
on page 213
•
Off-premises or out-of-building stations
on page 214
•
Off-premises connections
on page 214
•
Emergency transfer units and associated telephones
on page 219
•
808A Emergency Transfer Panel and telephone installation examples
on page 220
•
Installing external ringing
on page 226
•
Installing the queue warning indicator
on page 227
See the Job Aid entitled
Connector and Cable Diagrams (Pinout Charts)
for information on
pinouts.