Figure 74: Warnings
For further information, please also refer to <Corrective action>.
Not ready REMOTE (S0006)
The
S0006
display shows indications of the Not ready REMOTE group.
If such an indication has occurred, the display shows
S0006
:
●
the number of indications occurred
●
a blinking crossbar after approx. 3 seconds
Figure 75: Not ready REMOTE indications
For further information, please also refer to <Corrective action>.
Fault (S0007)
If a fault has occurred, the display shows
S0007
:
●
the number of faults occurred
●
a blinking exclamation mark after approx. 3 seconds
Figure 76: Fault
For further information, please also refer to <Corrective action>.
7.2.3.
Status indications according to NAMUR recommendation
These indications are available, if the parameter
Diagnostic classific. M0539
is set
to
NAMUR
.
Out of Specification (S0008)
The
S0008
indication shows out of specification indications according to NAMUR
recommendation NE 107.
If such an indication has occurred, the display shows
S0008
:
●
the number of indications occurred
●
a blinking triangle with question mark after approx. 3 seconds
Figure 77: Out of specification
60
SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1
Indications
ACExC 01.2
