4.
Assembly
4.1.
Mounting position
The product described in this document can be operated without restriction in any
mounting position.
4.2.
Handwheel fitting
Information
For transport reason, handwheels with a diameter of 400 mm and larger are supplied
separately within the scope of delivery.
Damage at the change-over mechanism due to incorrect assembly!
→
Only pivot change-over lever manually.
→
Do NOT use extensions as lever for operation.
→
First engage manual operation correctly, then mount handwheel.
1.
Manually lift the red change-over lever while slightly turning the shaft back and
forth until manual operation engages.
➥
Manual operation is properly engaged if the change-over lever can be shifted
by approx. 85°.
Figure 11:
2.
Push handwheel over the red change-over lever then onto the shaft.
Figure 12:
3.
Release change-over lever (should snap back into initial position by spring ac-
tion, if necessary, push it back manually).
17
SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1
ACExC 01.2
Assembly
