manualshive.com logo in svg

AUI bp-9000e, Owner'S Manual

Share
Download
AUI bp-9000e Owner'S Manual Download Page 70

AUI BP-9000E Owner's Manual 

- 64 - 

 
 
 
 
 
 
 
 
 

◆

 Warp between toothed holes of each ply 

Please use the paper which toothed holes warp between each ply (causes by the warp of multi-ply 
papers superposition) is less than 0.4 mm. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

◆

Binding hole, Clipped corner 

It is not support the paper which is with binding holes and clipped corners. 

 
 
 
 
 

◆

 Rumple, crease 

The paper should not have creases or rumples, especially for new paper. The first and last pages 
are easy to have creases or rumples, so please do not use them. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

◆

 The crease, crimp, fold and upturning of the paper top and bottom 

Please do not use the paper which is crease, puckered, crimp and upturning in the top and bottom. 
Or it may cause cheap printing quality or paper jam. Especially for the new paper, if it is crease 
from the first few pages, please do not use it. 

 

◆

 Paper folding part 

Please fold the paper base on the transverse perforation. It will affect paper feeding while the 

Caution: Do not use the paper with clipped corner or binding hole which is not include in 

the guarantee list. It can not guarantee device’s capability after using it.

 

Transverse perforation 

Transverse perforation 

Less than1 mm

 

Less than 1 mm 

Toothed holes section

 

Warp is less than 0.4 mm

 

Toothed hole

 

Rumple 

Crease 

Summary of Contents for bp-9000e

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands