manualshive.com logo in svg

AUI bp-9000e, Owner'S Manual

Share
Download
AUI bp-9000e Owner'S Manual Download Page 35

AUI BP-9000E Owner's Manual 

- 29 - 

4.4 Gap Adjust Lever 

Gap adjustment is used to obtain the best print quality possible when using different paper types. 
When using multi-ply paper, pull the gap adjust lever toward the multi-ply paper position to widen the 
gap between the print head and the platen. 
In general, position 1 is for single-ply paper. Moving the gap adjust lever one notch adjusts the print 
head gap an anount corresponding to the addition of one more paper ply. Re-adjustment of the lever 
may be required depending on the quality of the actual printout: 

y

  If the ribbon smears on the paper, the gap is too narrow. 

y

  If the printed image is too light to read, the gap is too wide.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note: 1. Before loading paper, please adjust the gap adjust lever to avoid paper jams. 

2. If the printed image on the last copy of the multi-ply paper is too light to read, please 

set the “MULTIPART” item in the Menu Setup Mode to DARK 1 or DARK 2. 

 
 

Move toward the front of the 
printwe for thicker paper 

Single-ply paper: 2

nd

 click

6-ply paper: 9

th

 click

 

9-ply paper: 13

th

 click

 

(The scale above 9 is not 
suggested for fanfold paper) 

Gap adjust lever 

Summary of Contents for bp-9000e

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands