AUI bp-9000e, Owner'S Manual

Page: 22 / 80

AUI BP-9000E Owner's Manual
- 16 -
8) Return to “Additional Port Information Required”, click “Next”.
9) A printer cover of “Completing the Add Standard TCP/IP Printer Port Wizard” pops up, click “Finish”.
10) In the selection of “Manufacturers/Printers”, click “Have Disk”, and then click “Next”.
11) A printer cover of “Install From Disk” pops up. Please according to the operating system
environment, such as Windows 2000/XP/Vista/Win7 operating system you should select the path
as follows: CD-ROM
→ “Driver” → “WIN2000 (XP-Vista-Win7)”, click “open”, then click “OK”, then
return to the window “install printer software”, click “next”.
12) Follow the direct click “next” gradually till the installation is finish. At this time, printer network driver
is installed completely.
2. Upgrade-install printer network driver (setting driver’s network port)
If PC has installed the printer’s driver, set driver’s network port to carry out network printing. The
concrete steps are shown below:
1) Click “Start” → “Settings”, select “Printers”.
2) Right click this printer driver, click “Properties” on the printer cover coming out.
3) A printer cover of “Properties” pops up, click “Ports” and “Add Ports”.
4) A printer cover of “Printer port” pops up, select “Standard TCP/IP Port”, click “New port”.