AudioCodes mediapack MP-500, User Manual

Page: 422 / 574

SIP User's Manual 422 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
Web: Destination Phone Number
Manipulation Table for IP to Tel Calls
EMS: EMS: SIP Manipulations >
Destination IP to Telcom
[NumberMapIP2Tel]
This ini file table parameter manipulates the destination
number of IP-to-Tel calls. The format of this parameter is
as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_
Index =
NumberMapIp2Tel_ DestinationPrefix ,
NumberMapIp2Tel_ SourcePrefix ,
NumberMapIp2Tel_ SourceAddress ,
NumberMapIp2Tel_ NumberType ,
NumberMapIp2Tel_ NumberPlan ,
NumberMapIp2Tel_ RemoveFromLeft ,
NumberMapIp2Tel_ RemoveFromRight ,
NumberMapIp2Tel_ LeaveFromRight ,
NumberMapIp2Tel_ Prefix2Add ,
NumberMapIp2Tel_ Suffix2Add ,
NumberMapIp2Tel_ IsPresentationRestricted ;
[\NumberMapIp2Tel]
For example:
[NumberMapIp2Tel]
[\NumberMapIp2Tel]
Notes:
ƒ
This table parameter can include up to 100 indices.
ƒ
The parameter
NumberMapIp2Tel_IsPresentationRestricted is not
applicable. Set its value to $$.
ƒ
The parameters NumberMapTel2Ip_ SrcIPGroupID,
NumberMapIp2Tel_NumberType, and
NumberMapIp2Tel_NumberPlan are not applicable. Set
these to $$.
ƒ
RemoveFromLeft, RemoveFromRight, Prefix2Add,
Suffix2Add, LeaveFromRight are applied if the called
and calling numbers match the DestinationPrefix,
SourcePrefix, and SourceAddress conditions.
ƒ
The manipulation rules are executed in the following
order: RemoveFromLeft, RemoveFromRight,
LeaveFromRight, Prefix2Add, and Suffix2Add.
ƒ
Parameters can be skipped using two dollar signs ('$$').
ƒ
The Source IP address can include the 'x' wildcard to
represent single digits. For example: 10.8.8.xx
represents all addresses between 10.8.8.10 and
10.8.8.99.
ƒ
The Source IP address can include the asterisk ('*')
wildcard to represent any number between 0 and 255.
For example, 10.8.8.* represents all the addresses
between 10.8.8.0 and 10.8.8.255.
ƒ
To configure manipulation of destination numbers for
IP-to-Tel calls using the Web interface, refer to
''Configuring the Number Manipulation Tables'' on page
195 ).
ƒ
For a description on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' on page 273 .