AudioCodes mediapack MP-500, User Manual

Page: 262 / 574

SIP User's Manual 262 Document #: LTRT-12801
MP-500 MSBG
By default, all log messages are displayed one after another, sorted by their order of
posting by the device (latest on top). You can sort the messages according to the column
titles 'Time', 'Component', or 'Severity', by clicking the column header. You can also filter
the log messages by the component that generated them or by their severity, providing a
more refined list. By default, the page displays log messages with 'debug' severity level and
higher, for all components. You may change the severity level for this filter.
¾
To add a new log display filter:
1. In the 'Filters' group, click the New Filter link; the 'Filters' group displays a new
Component entry.
Figure 3-210: Adding a New Filter
2. Using the drop-down lists, select the component and severity level by which to sort the
log messages.
3. Click Apply Filters to display the messages in your specified criteria.
You can also delete filters using their respective action icons. Clicking Reset Filters deletes
all the defined filters. Defined filters override the default filter that displays all messages.
You can use the buttons located at the top of the page to perform the following:
„ Close: closes the 'Log' page and returns to the device's Home page.
„ Clear Log: clears all currently displayed log messages.
„ Refresh: refreshes the page to display the latest log messages.