AudioCodes mediapack MP-500, User Manual

Page: 350 / 574

SIP User's Manual 350 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
Web: Tel Profile Settings Table
EMS: Protocol Definition > Telephony Profile
[TelProfile] This ini file table parameter configures the Tel Profile table. Each Tel Profile
ID includes a set of parameters (which are typically configured separately
using their individual, "global" parameters). You can assign these Tel Profile
IDs to the Hunt Group table (TrunkGroup parameter).Therefore, Tel Profiles
allow you to easily apply different behaviors (parameter settings) to different
channels (i.e., ports).
The format of this parameter is as follows:
[TelProfile]
FORMAT TelProfile_
Index = TelProfile_ ProfileName ,
TelProfile_ TelPreference , TelProfile_ CodersGroupID ,
TelProfile_ IsFaxUsed *, TelProfile_ JitterBufMinDelay *,
TelProfile_ JitterBufOptFactor *, TelProfile_ IPDiffServ *,
TelProfile_ SigIPDiffServ *, TelProfile_ DtmfVolume , TelProfile_ InputGain ,
TelProfile_ VoiceVolume , TelProfile_ EnableReversePolarity ,
TelProfile_ EnableCurrentDisconnect , TelProfile_ EnableDigitDelivery ,
TelProfile_ EnableEC , TelProfile_ MWIAnalog , TelProfile_ MWIDisplay ,
TelProfile_ FlashHookPeriod , TelProfile_ EnableEarlyMedia *,
TelProfile_ ProgressIndicator2IP *, TelProfile_ TimeForReorderTone *,
TelProfile_ EnableDIDWink , TelProfile_ IsTwoStageDial ,
TelProfile_ DisconnectOnBusyTone , TelProfile_ EnableVoiceMailDelay ,
TelProfile_ DialPlanIndex ;
[\TelProfile]
For example:
TelProfile 3 = ITSP_acme, 1, 0, $$, $$, 10, 46, 40, -11, 0, 0, 1, 0, 0, 1, 0, 0,
700, 0, -1, 255, 0, 1, 1, 1, -1;
Notes:
ƒ
You can configure up to nine Tel Profiles (i.e., indices 1 through 9).
ƒ
The parameter TelPreference determines the priority of the Tel Profile (1
to 20, where 20 is the highest priority). If both IP and Tel profiles apply to
the same call, the coders and other common parameters (indicated with
an asterisk) of the preferred Profile are applied to that call. If the
preference of the Tel and IP profiles is identical, the Tel Profile
parameters take precedence.
ƒ
The asterisk (*) indicates common parameters used in both IP and Tel
Profiles.
ƒ
The parameter EnableVoiceMailDelay is applicable only if voice mail is
enabled globally (using the parameter VoiceMailInterface).
ƒ
Assign intuitive names (ProfileName) to the Tel Profiles so that you can
easily identify them later.
ƒ
To use the settings of the corresponding global parameter, enter the
value -1.
ƒ
To apply default settings to a parameter, enter two adjacent dollar signs
($$).
ƒ
For a detailed description of each parameter, refer to its corresponding
"global" parameter.
ƒ
For a description of using ini file table parameters, refer to ''Format of ini
File Table Parameters'' on page 273 .