AudioCodes mediapack MP-500, User Manual

Page: 360 / 574

SIP User's Manual 360 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
Web/EMS: RFC 2833 Payload
Type
[RFC2833PayloadType]
The RFC 2833 DTMF relay dynamic payload type.
The valid range is 96 to 99, and 106 to 127. The default is 96.
The 100, 102 to 105 range is allocated for proprietary usage.
Notes:
ƒ
Certain vendors (e.g., Cisco) use payload type 101 for RFC
2833.
ƒ
When RFC 2833 payload type (PT) negotiation is used (the
parameter TxDTMFOption is set to 4), this payload type is
used for the received DTMF packets. If negotiation isn't used,
this payload type is used for receive and for transmit.
[ReplaceNumberSignWithEsca
peChar] Determines whether to replace the number sign (#) with the
escape character (%23) in outgoing SIP messages for Tel-to-IP
calls.
ƒ
[0] Disable (default)
ƒ
[1] Enable = All number signs #, received in the dialed DTMF
digits are replaced in the outgoing SIP Request-URI and To
headers with the escape sign %23.
Note: This parameter is applicable only if the parameter
IsSpecialDigits is set 1.
Web: Special Digit
Representation
EMS: Use Digit For Special
DTMF
[UseDigitForSpecialDTMF]
Defines the representation for ‘special’ digits (‘*’ and ‘#’) that are
used for out-of-band DTMF signaling (using SIP INFO/NOTIFY).
ƒ
[0] Special = Uses the strings ‘*’ and ‘#’ (default).
ƒ
[1] Numeric = Uses the numerical values 10 and 11.