AudioCodes mediapack MP-500 User Manual Download Page 286

Page: 286 / 574

SIP User's Manual

286

Document #: LTRT-12801

MP-500

MSBG

5.6.3

Configuring SNMPv3 to Operate with Non-Configured SNMPv3
System

The procedure below describes how to configure SNMPv3 using the EMS.

To configure the device to operate with SNMPv3 via EMS (to a non-
configured System):

In the MG Tree, select the required Region to which the device belongs, and then
right-click the device.

From the shortcut menu, point to

Configuration

, and then click

Snmp Configuration

;

the MG Information screen appears.

Figure

5-8: MG Information Window

Select the

SNMPv3

option.

Configure the SNMPv3 fields, and then select the

Update Media Gateway SNMP

Settings

check box.

Click

; the 'Results Table' window appears displaying the update progress.

Click

Done

when complete.

In the MGs List, double-click the device; the Tab bar appears.

Open the 'SNMPv3 Users' screen (

Network Provisioning

frame >

SNMPv3 Users

tab).

Select the tabs arrow button, and then from the shortcut menu, choose

Unit Value

10.

The 'SNMPv3 Users' table is refreshed with the values that you entered in Step 4.

11.

Click the

Save

button; the EMS and the device are now synchronized.

Summary of Contents for mediapack MP-500































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands

AudioCodes mediapack MP-500, User Manual

Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands