AudioCodes mediapack MP-500, User Manual

Page: 208 / 574

SIP User's Manual 208 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
ƒ
The source IP address can include the "x" wildcard to represent
single digits. For example: 10.8.8.xx represents all the addresses
between 10.8.8.10 to 10.8.8.99.
ƒ
The source IP address can include the asterisk (*) wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all addresses between 10.8.8.0 and 10.8.8.255.
Hunt Group ID
[PstnPrefix_TrunkGroupId]
The Hunt Group to which incoming SIP calls are assigned that
match all or any combination (including only a single parameter) of
the parameters described above.
IP Profile ID
[PstnPrefix_ProfileId]
The IP Profile (configured in ''Configuring P Profiles'' on page 166 )
that is assigned to the routing rule.
Source IP Group ID
[PstnPrefix_SrcIPGroupID]
The source IP Group (1-9) associated with the incoming IP-to-Tel
call. This is the IP Group from where the INVITE message
originated. This IP Group can later be used as the 'Serving IP
Group' in the Account table (refer to ''Configuring the Account Table''
on page
157 ) for obtaining authentication user name/password for
this call.
3.4.5.10.4 Configuring the Internal DNS Table
The 'Internal DNS Table' page, similar to a DNS resolution is used to translate up to 20 host
(domain) names into IP addresses (e.g., when using the 'Tel to IP Routing' table. Up to four
different IP addresses can be assigned to the same host name, typically used for
alternative routing (for Tel-to-IP call routing).
Notes:
•
The device initially attempts to resolve a domain name using the Internal
DNS table. If the domain name isn't listed in the table, the device
performs a DNS resolution using an external DNS server.
•
You can also configure the DNS table using the ini file table parameter
DNS2IP (refer to ''DNS Parameters'' on page 297 ).
¾
To configure the internal DNS table:
1. Open the 'Internal DNS Table' page ( Configuration tab > Protocol Configuration
menu > Routing Tables submenu > Internal DNS Table page item).
Figure 3-164: Internal DNS Table Page
2. In the 'Domain Name' field, enter the host name to be translated. You can enter a
string of up to 31 characters long.
3. In the 'First IP Address' field, enter the first IP address (in dotted-decimal format
notation) to which the host name is translated.