AudioCodes mediapack MP-500, User Manual

Page: 179 / 574

Version 5.8 179 October 2009
SIP User's Manual 3. Web-Based Management
Parameter Description
define an IP Group but only an SRD, then the first IP Group
associated with this SRD (in the 'IP Group' table) is used.
Destination SRD ID
[IP2IPRouting_DestSRDID]
Determines the SRD ID.
The default is -1.
Note: The destination IP Group must belong to the
destination SRD, if both are configured in this table.
Destination Address
[IP2IPRouting_DestAddress]
The destination IP address (or domain name, e.g.,
domain.com) to where the call is sent.
Notes:
ƒ
This parameter is applicable only if the parameter
'Destination Type' is set to 'Dest Address'
[1] .
ƒ
When using domain names, enter a DNS server IP
address or alternatively, define these names in the
'Internal DNS Table' (refer to ''Configuring the Internal
SRV Table'' on page
209 ).
Destination Port
[IP2IPRouting_DestPort]
The destination port to where the call is sent.
Destination Transport Type
[IP2IPRouting_DestTransportType]
The transport layer type for sending the call:
ƒ
[-1] Not Configured (default)
ƒ
[0] UDP
ƒ
[1] TCP
ƒ
[2] TLS
Note: When this parameter is set to -1, the transport type is
determined by the parameter SIPTransportType.
Alternative Route Options
[IP2IPRouting_AltRouteOptions]
This parameter is not applicable to SAS.