AudioCodes mediapack MP-500, User Manual

Page: 159 / 574

Version 5.8 159 October 2009
SIP User's Manual 3. Web-Based Management
Parameter Description
'Source IP Group ID' defined in the 'IP to Hunt Group Routing'
table (refer to ''Configuring the IP to Trunk Group Routing'' on
page
206 ).
Note: If no match is found in this table for incoming or outgoing
calls, the username and password defined in the 'Authentication'
table (refer to Configuring Authentication on page
212 ) or the
global parameters (UserName and Password) defined on the
'Proxy & Registration' page.
Username
[Account_Username]
Digest MD5 Authentication user name (up to 50 characters).
Password
[Account_Password]
Digest MD5 Authentication password (up to 50 characters).
Host Name
[Account_HostName]
Defines the Address of Record (AOR) host name. It appears in
REGISTER From/To headers as ContactUser@HostName. For
successful registrations, this HostName is also included in the
INVITE request's From header URI. If not configured or if
registration fails, the 'SIP Group Name' parameter from the ‘IP
Group’ table is used instead.
This parameter can be up to 49 characters.
Register
[Account_Register]
Enables registration.
ƒ
[0] No = Don't register
ƒ
[1] Yes = Enables registration
When enabled, the device sends REGISTER requests to the
Serving IP Group. In addition, to activate registration, you also
need to set the parameter 'Registration Mode' to 'Per Account' in
the 'Hunt Group Settings' table for the specific Hunt Group. The
Host Name (i.e., host name in SIP From/To headers) and Contact
User (user in From/To and Contact headers) are taken from this
table upon a successful registration. See the example below:
REGISTER sip:audiocodes SIP/2.0
Via: SIP/2.0/UDP
10.33.37.78;branch=z9hG4bKac1397582418
From: <sip:ContactUser@HostName>;
tag=1c1397576231
To: <sip: ContactUser@HostName >
Call-ID: 1397568957261200022256@10.33.37.78
CSeq: 1 REGISTER
Contact:
<sip:ContactUser@10.33.37.78>;expires=3600
Expires: 3600
User-Agent: Audiocodes-Sip-
Gateway/v.5.80A.008.002
Content-Length: 0
Notes:
ƒ
The Trunk Group account registration is not effected by the
parameter IsRegisterNeeded.
ƒ
If registration to an IP Group(s) fails for all the accounts defined
in this table for a specific Hunt Group, and if this Group
includes all the channels in the , the Hunt Group is set to Out-
Of-Service if the parameter OOSOnRegistrationFail is set to 1
(refer to ''Proxy & Registration Parameters'' on page
147 ).