46
Setting the audio output details
Setting the USB output
Select the USB output bus and set the transmission level.
1. Click “USB OUT”.
2. Select the bus for outputs USB OUT1 and 2.
3. Select the level for USB output.
• Click
/
to adjust the level. You can also click the number and
enter another value directly.
Setting the oscillator
The product has an oscillator function on the output channels. This
function is convenient for checking the audio during setup or maintenance.
1. Click “Oscillator”.
2. Click “Enable”.
3. Select between “Sine Wave” and “Pink Noise” for the “Source”.
4. Select the frequency next to “Frequency”.
5. Adjust the level next to “Level”.
6. Select the output channels under “Assign”.
• When “Enable” is ON for the selected channels, the oscillator will be activated.
