Audio Technica ATDM-1012 User Manual Download | Manualshive

Page: 2 / 96

background image

2

Introduction

Thank you for purchasing this Audio-Technica product.
Before using the product, read through the Quick Start Guide and refer to this user manual as necessary to ensure that you will use the product
correctly.

Checking the package contents

Before use, check to make sure that all of the following items are contained in the package.
If any of the items is missing from your package or damaged, contact your local Audio-Technica dealer.

• ATDM-1012/ATDM-1012DAN unit

• Euroblock connector ×22

• Power cable

• Quick Start Guide

Trademarks

• SMARTMIXER

TM

is a trademark or registered trademark of Audio-Technica Corporation.

• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

• iOS is a trademark or registered trademark of Cisco in the U.S. and other countries.

• App Store is a service mark of Apple Inc.

• Google, the Google logo, Google Play, the Google Play logo, and Android

TM

are trademarks or registered trademarks of Google Inc.

• All other company and product names that appear in this document are trademarks or registered trademarks of their respective owners.

«
1
2
3
4
...
»

Summary of Contents for ATDM-1012

































































































Reviews:

No comments

Related manuals for ATDM-1012

Brand: Varimixer Pages: 20

Brand: Tascam Pages: 91

Brand: Mackie Pages: 24

Brand: Profi Cook Pages: 70

Brand: Avantco Equipment Pages: 16

PT-100 023-9994-000

Brand: Fender Pages: 2

Brand: Akura Pages: 10

Brand: Hamilton Beach Pages: 28

ActiveCare 3500

Brand: Cura1 Pages: 2

Brand: Cobra Acoustic Pages: 2

HAMMERTONE METAL

Brand: Fender Pages: 8

Brand: Kogan Pages: 8

Brand: AEG Pages: 36

Brand: AEG Pages: 48

EASYCOMPACT STM5200

Brand: AEG Pages: 24

PREMIUMLINE 7 Series

Brand: AEG Pages: 24

Brand: Kenmore Pages: 16

Brand: Sound Devices Pages: 210

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands