Audio Technica ATDM-1012 User Manual Download

Page: 24 / 96

Administrator screen

Header

If you log in as the Administrator, you can access the input/output Settings and Settings & Maintenance screens.
The header at the top remains the same on both screens.

❶

Device color

This color helps you identify each device when multiple products
are operated.

❷

Device name

The name set for the product is displayed.

❸

Input indicator lamp

The input level is displayed.

❹

Output indicator lamp

The output level is displayed.

❺

Audio-Technica LINK status

The Audio-Technica LINK connection status is displayed.

❻

IP remote status

The active status of IP control is displayed.

❼

Error status

An error status is displayed.

❽

Preset

The selected preset and the name of the loaded preset are
displayed.

Header

Input Settings

Settings & Maintenance

❸

❶

❷

❹

❺ ❻ ❼

❽

Summary of Contents for ATDM-1012

































































































Search results

Summary of Contents for ATDM-1012

Reviews:

Related manuals for ATDM-1012

Brands by name

Popular brands

Audio Technica ATDM-1012, User Manual

Search results

Summary of Contents for ATDM-1012

Reviews:

Related manuals for ATDM-1012

Brands by name

Popular brands