20
Web Remote
What Is Web Remote?
Web Remote is a web-based application for controlling this product.
With Web Remote, you can remotely perform the following tasks from
your Windows PC, Mac, iOS or Android device (hereinafter “control
device”).
• Check the status of the product
• Change the various settings of the product
What is “Locate”?
“Locate” is a launcher application for Web Remote. Connect your
control device, then activate “Locate”. With “Locate”, you can quickly
access Web Remote without entering the IP address assigned to the
product.
• You can also launch Web Remote without using “Locate”.
Recommended environment
OS supporting Web Remote and “Locate”
• Microsoft Windows 8.1 or later
• Apple macOS 10.14 Mojave or later
• Android OS 8.0 or later
• iOS 12 or later
Recommended web browsers for Web Remote
• Google Chrome (Windows and Android)
• Mozilla Firefox (Windows)
• Safari (macOS and iOS)
• You can log into Web Remote from up to 3 control devices at the same
time. If two different web browsers are running on one control device,
Web Remote recognizes access from two control devices.
• To exit Web Remote, make sure to log out first, and then close the web
browser screen. If the screen is closed without logging out, the session
may continue, and you may remain logged into Web Remote.
• The minimum size of the web remote screen is 1024 x 768 pixels. For the
control device, use a large enough display monitor to display the Web
Remote screen in the web browser.
Preparing Web Remote
Connect a control device to the product
1. Before connecting a control device to the product, network
settings for both devices must be performed.
• If IP addresses are obtained automatically when connecting
(1) Set the product’s IP Config Mode to “Auto”.
– The product ships from the factory in “Auto” mode.
(2) Set the control device’s network settings so that it connects to the
network.
• If static IP addresses are used when connecting
(1) Set the product’s IP Config Mode to “Static”.
– The IP address is set to a static value.
The default value is “192.168.33.102”.
2. Use a wired or wireless connection to connect the control
device to the product.
3. Turn on the control device and the product.
• If IP addresses are obtained automatically when connecting, it may take
some time before the IP address is set.
Setting up “Locate”
1. Download the “Locate” installer/application to the control
device.
• For Windows and Mac:
Download from the Audio-Technica website (www.audio-technica.com)
for your country or region.
• For iOS and Android:
Download from the App Store or Google Play.
Upon completion of the download, proceed to Step 4.
2. Double-click “setup.exe” you have downloaded.
• The Setup Wizard opens.
3. Follow the on-screen instructions to install “Locate”.
• When installation is complete, the “Locate” icon appears on the desktop.
4. After confirming that the ATDM-1012 is powered up and
connected to the same network as the control device, double-
click the “Locate” icon.
• “Locate” launches. All ATDM-1012s connected to the network are
automatically detected.
5. Select the ATDM-1012 you want to control via Web Remote,
and click “Open”.
• The Web Remote Login screen appears.
• When clicking the “Identify” button, the button will illuminate in red, and
the indicator lamps on the front panel of the selected ATDM-1012 will
blink. Use this function to identify a specific ATDM-1012 in the “Locate”
list when multiple ATDM-1012s are connected to the system.
