45
Setting the audio output details
Setting the fader group
If the channel faders for the primary and extensions are set to the same
group on this screen and assigned in the “Fader Settings” (P.50) on
the operator screen for the primary, the levels of channels belonging to
the same group will be controlled using the fader assigned to that
primary.
1. Click the area in the red box on the screen shown below.
2. Select the fader group.
Setting the Min/Max Volume
Determine the Min/Max Volume and turn it ON/OFF for each channel.
1. Click the area in the red box on the screen shown below.
• The setting is turned ON (blue)/OFF (no color) each time the switch is clicked.
• The fader minimum/maximum are set at the position when the Min/Max Volume
is turned ON. The range below and above the specified position is grayed out.
To change the position, turn the Max Volume OFF and then back ON.
