55
Key functions
Setting AEC
1. Click “AEC”.
2. From “Mode”, select “AEC”.
3. From “AEC Reference”, select the reference signal (the signal for
removing echoes).
• In general, a signal from the other party is set as the reference signal.
4. Turn AEC ON for the microphone to be used (for each channel).
5. From the Matrix Assign screen “NC Bus Select”, select the
signal (output bus) to be returned to the other party.
• Perform this setting to use the noise canceling function. The noise
canceling function is set for each bus. Access the Matrix Assign screen
and set for each bus. When setting AEC, we recommend setting the
noise canceling function on the Matrix Assign screen.
