43
Setting the audio output details
Turning the compressor ON/OFF
Switch the compressor between ON and OFF for each channel. This
setting can be made only when the compressor module is assigned.
This operation is the same as that for the input channels.
1. Click the area in the red box on the screen shown below.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.
Turning the Limiter ON/OFF
Switch the Limiter between ON and OFF for each channel. This setting
can be made only when the Limiter module is assigned.
1. Click “Limiter”.
2. Select the check box next to the channel(s) to which it will be
assigned.
3. Click the area in the red box on the screen shown below.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.
Adjusting the dynamics
1. Click the area in the red box on the screen shown below.
• The Settings screen appears.
2. Set each item.
Turning the delay function ON/OFF
Specify whether or not to delay the output of each channel.
1. Click the area in the red box on the screen shown below.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.
Setting the delay time for delay function
1. Set the amount of time to delay.
• Click
/
to adjust the time. You can also click the time and enter
the value directly.
