0
<t
0
N
,.....
N
....
0
,.....
Vl
CX)
Changing the cut-off speed
Applies to: vehicles with speed limiter
.,. To increase or reduce the cut-off speed in steps
of 1 km/h,
briefly push
the lever one level up
wards or downwards towards
G
Y
0
¢
page 88,
Fig. 90.
.,. To increase or reduce the cut-off speed in steps
of 10 km/h,
briefly push
the lever two levels
upwards or downwards towards
G
Jl
0
.
.,. To increase or reduce the cut-off speed continu
ously, push the lever one or two levels upwards
or downwards towards
G)
/
0
and
hold
the Lev
er until the desired speed is reached.
Overriding the cut-off speed
Applies to: vehicles with speed limiter
To override the speed limiter temporarily, press
the accelerator fully past the point of resistance
(kick-down feature).
Speed limiting is suspended temporarily. The in
dicator lamp
Ill
flashes while the system is deac
tivated; the cut-off speed setting will remain
stored. The system is reactivated automatically
as soon as your speed drops below the original
stored setting.
Switching off
Applies to: vehicles with speed limiter
Switching off temporarily
.,. Push the lever towards
@
(click stop not en
gaged)¢
page 88, Fig. 90.
The instrument
cluster will indicate the stored cut-off speed,
and the indicator Lamp
mm
will Light up.
Switching off completely
.,. Push the Lever to position
@
(click stop engag-
ed), or
.,. Switch off the ignition.
The cut-off speed setting will remain stored after
the system is temporarily deactivated. To resume
the programmed cut-off speed, pull the lever to
position
(!)
.
The vehicle speed is limited to the
stored cut-off setting as soon as your current
driving speed drops below the stored cut-off
speed.
Driver assist systems
The stored cut-off speed will be deleted once the
ignition is switched off.
Automatic deactivation
mm
Speed limiter: currently unavailable. See
owner's manual
The speed limiter has been automatically deacti
vated because the system has detected a fault
which could impair its function. Try switching on
the speed limiter again later .
&
WARNING
The speed limiter may be deactivated if a
fault occurs in the brake system (e.g. if the
brakes overheat) while the speed limiter is ac
tivated.
{CD)
Note
If a system fault requires the speed limiter to
switch off automatically, for safety reasons it
does not switch off completely until the driver
releases the accelerator pedal once or deacti
vates the system manually.
89
